Removing Inner Rear Wheel Housing

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect connection points.

1.1 Remove punch rivets using VAS 852 001 - body dent removal system, aluminium and VAS 6790 - compact booster .

5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

Fig 1: Inner Rear Wheel Housing Component Location

G14277099

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection points

G14277100

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection points

G14277101

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection points

1.2 Unscrew self-tapping screws

G14277102

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws

G14277103

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws

Heat bonding areas Bonding areas. V.A.G 1416 - Hot-air blower

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Heat bonding areas Bonding areas. V.A.G 1416 - Hot-air blower

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Remove inner rear wheel housing.