Removing Outer Rear Wheel Housing

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect connection points Connection points .

Fig 1: Outer Rear Wheel Housing Component Location
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection points
1. 1.1 Remove punch rivets using VAS 852 001 - body dent removal system, aluminium and VAS 6790 - compact booster .
  5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS
2. 1.2 Unscrew self-tapping screws
Disconnect connection points Connection points .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection points
1. 2.1 Remove punch rivets using VAS 852 001 - body dent removal system, aluminium and VAS 6790 - compact booster .
  5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS
Heat bonding areas Bonding areas . V.A.G 1416 - Hot-air blower

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Heat bonding areas Bonding areas . V.A.G 1416 - Hot-air blower

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Remove outer rear wheel housing.