Subsequent Work For Body Repairs (Without Straightening System)
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Clean joint areas and sheetmetal flanges with a wire brush.
- Prime joint areas and sheetmetal flanges with 2K primer.
- Restore standard seal using body sealant.
5X00IN03 CORROSION PROTECTION MEASURES DURING REPAIR WORK
Also seal the repair area carefully.
- Paint repair area and adjacent surfaces, if necessary.
- Restore standard underbody protection using underbody sealant.
Also carefully apply cavity preservation to the repair area.
- Apply standard cavity preservation.
Also carefully apply cavity preservation to the repair area.
- Install removed accessories in the repair area.