Removing Holder

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT:

Tapping with a hammer will break the thread in the cast component. As a result, the self-tapping screws in the inner side member will fall down.

Remove punch rivets using VAS 852 001 - Body Dent Removal System. Aluminium and VAS 6790 - Compact Booster .
5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rivet area
Remove holder.
Use a hammer to tap against the tips of the self-tapping screws -1-

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws 4 Tap self-tapping screws through.