LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (53 - Body Rear 9YA) >> WM, 53485500 Replacing Rear Side Member >> Preparing Lock Carrier For Installation >> Notes

Preparing Lock Carrier For Installation: Notes

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install lock carrier and secure it to the body.
  2. Damaged side:

    Drill bore holes Bore holes for rivets  for rivets through both sheet-metal panels.

    Diameter 6.6 mm

    G14276762Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bore holes for rivets

  3. Remove lock carrier.
  4. Prepare marked areas Areas for bonding and riveting for bonding and riveting.

    5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

    G14276763Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Areas for bonding and riveting

  5. Remaining preparation as described in Workshop Service Information.

    530955 REPLACING LOCK CARRIER - SECTION ON "PREPARING" 

scientia non olet · About LEMON Manuals