Preparing Holder For Installation
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Fit in holder and secure it to the body.
- Drill holes for blind rivets -A and B-
. Diameter 6.6 mm
Rivet areas
- Remove holder.
- Prepare holder Joint area for bonding and riveting.
5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE
Joint area