LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (53 - Body Rear 9YA) >> WM, 53485500 Replacing Rear Side Member >> Preparing Closing Panel Connecting Piece For Installation

Preparing Closing Panel Connecting Piece For Installation

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit in closing panel connecting piece and secure it to the body.
  2. Drill holes for blind rivets -A-  , Diameter 6.6 mm
    G14276712Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Rivet areas

  3. Remove closing panel connecting piece.
  4. Prepare closing panel connecting piece Bonding areas for bonding and riveting.

    5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

    G14276713Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

scientia non olet · About LEMON Manuals