LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (53 - Body Rear 9YA) >> WM, 53485500 Replacing Rear Side Member >> Installing Holder

Installing Holder

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit in holder and secure it to the body.
  2. Apply adhesive on joint areas Joint areas  of the body.

    5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

    G14276722Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Joint areas

  3. Apply adhesive on holder Joint areas  .

    5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

    G14276723Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Joint areas

  4. Rivet in holder in areas -A and B-  .

    Area -A-  : BLIND RIVET 999.190.229.01 

    Areas -B-  : BLIND RIVET 999.190.227.01 

    G14276724Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Rivet areas

scientia non olet · About LEMON Manuals