Removing C-Pillar Reinforcement

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: The C-pillar reinforcement baffle will be damaged irreparably during removal and must be replaced.

Disconnect connection points Connection points .

Fig 1: C-Pillar Reinforcement Component Location
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection points
1. 1.1 Remove punch rivets using VAS 852 001 - body dent removal system, aluminium and VAS 6790 - compact booster .
  5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS
2. 1.2 Drill out spotwelds -A- .
3. 1.3 Unscrew self-tapping screws
Heat bonding areas Bonding areas . V.A.G 1416 - Hot-air blower

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Remove C-pillar reinforcement.