Subsequent Work
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Install lock carrier.
Subsequent work for body repairs (without straightening system)
- Clean joint areas and sheetmetal flanges with a wire brush.
- Prime joint areas and sheetmetal flanges with 2-component primer.
- Restore standard seal with body sealant
5X00IN42 Seam sealing
Also seal the repair area carefully.
- Paint repair area and adjacent surfaces, if necessary.
- Restore standard underbody protection with underbody sealant
- Apply standard cavity preservation
Also apply cavity preservation to the repair area.
- Install removed add-on parts in the repair area.