LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (53 - Body Rear 9YA) >> WM, 53245500 Replacing Rear Trunk Floor Panel >> Removing Rear Boot Floor Plate

Removing Rear Boot Floor Plate

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew self-tapping screw -1- 
    Fig 1: Rear Boot Floor Plate Component Location
    G14276340Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Self-tapping screws, inner

  2. Unscrew self-tapping screws
    G14276341Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Self-tapping screws, lower

  3. Remove punch rivets Punch rivets  using VAS 852 001 - dent removal unit  and VAS 6790 - compact booster  .

    5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

    G14276342Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Punch rivets

  4. Heat bonding areas Bonding areas  using V.A.G 1416 - hot-air blower  .
    G14276343Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  5. Remove rear boot floor plate.