Removing Lower Corner Part (Left)

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Drill through punch rivets -2- through all sheetmetal panels.

Fig 1: Lower Corner Part Component Location (Left)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Punch rivets
Remove punch rivets and penetrated joints -1- using VAS 852 001 - Body Dent Removal System, Aluminium and VAS 6790 - Compact Booster .
5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Punch rivets and penetrated joints
Heat the marked bonding areas using V.A.G 1416 - Hot-Air Blower .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Remove lower corner part (left).