Installing Lower Corner Part (Left)

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Countersunk head of the flow-form rivets must be pointing outwards. Observe the required punch and joining direction.

Install lower corner part (left) and check that it fits perfectly.
Apply adhesive on the joint area of the body.
5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

Application depth 0.5 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Adhesive on connection areas
Apply adhesive on lower corner part (left).
5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

Application depth 0.5 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Adhesive on component
1. 3.1 Also apply a bead of adhesive all around the bonding surface. Application depth 3 mm
Set blind rivets
Area -1- BLIND RIVETS 999.190.229.01

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Blind rivets
Set flow-form rivets.
5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

Area -2- RIVET 9A7.008.606.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Flow-form rivets