LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (53 - Body Rear 9YA) >> WM, 530955 Replacing Lock Carrier >> Removing Lock Carrier

Removing Lock Carrier

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Only make cuts in the top plate. Make sure not to damage the plate underneath when doing this.
IMPORTANT: Mark cuts A in accordance with the new part. Make sure to leave an overlap of approx. 30 mm with respect to the body.
  1. Mark and make cuts -A -  . Distance approx. 150 mm 
    Fig 1: Checking Lock Carrier Cutting Dimension
    G14276159Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Cuts A

  2. Remove punch rivets in areas -A, B and C-  using VAS 852 001 - dent removal unit, aluminium  and VAS 6790 - Compact booster  .

    5X00IN REPLACING PUNCH RIVETS AND PENETRATED JOINTS

    G14276160Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Punch rivets

  3. Remove punch rivets in areas -A and B-  using VAS 852 001 - dent removal unit, aluminium  and VAS 6790 - Compact booster  .

    5X00IN REPLACING PUNCH RIVETS AND PENETRATED JOINTS

    G14276161Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Punch rivets

  4. Heat bonding areas Bonding areas. V.A.G 1416 - Hot-air blower 
    G14276162Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  5. Heat bonding areas Bonding areas  . > V.A.G 1416 - Hot-air blower 
    G14276163Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  6. Remove lock carrier.
scientia non olet · About LEMON Manuals