Preparing Connection Areas Of The Body For Installing The Lock Carrier
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
- Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
- The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
- Do not begin bonding work until all materials and tools necessary for later repair work are available.
- Align the sealing surface and connections of the body.
- Prepare the marked areas Joining areas on lock carrier
for joining.
5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE
Joining areas on lock carrier
- Prepare connection areas Connection areas on lock carrier
for welding.
Connection areas on lock carrier