LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (50 - Body Front 9YA) >> WM, 50811900 Removing And Installing Cross Panel (Upper Section) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine cover (design cover).

    108319 Removing and installing engine cover (design cover) (V6 Diesel)

    108319 Removing and installing engine cover (design cover) (V6 Turbo)

    108319 Removing and installing engine cover (design cover) (V8 Biturbo)

    108319 Removing and installing engine cover (design cover) (V8 Diesel)

  2. Remove cowl panel cover.

    508719 REMOVING AND INSTALLING COWL PANEL COVER 

  3. Place a container underneath to collect washer fluid.
  4. Remove expansion rivet -1-  .
    G14274773Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Expansion rivet on windscreen-washer reservoir

  5. Pull filler neck -2-  up and remove it -Arrow-  .
    G14274774Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Filler neck for windscreen-washer reservoir

  6. Open retaining clips -1-  and pull out air conditioning lines -2-  .
    G14274775Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Air-conditioning lines

scientia non olet · About LEMON Manuals