Preparing Lower Cover Plate For Installation
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Fit in lower cover plate and secure it to the body.
- Drill holes for rivets -A and B-
. > Diameter 6.6 mm
Rivet area
- Remove lower cover plate.
- Prepare marked areas > Bonding areas
for bonding and riveting.
5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE
Bonding areas