LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (50 - Body Front 9YA) >> WM, 50795503 Replacing Front Side Member >> Preparing Front Side Member For Installation

Preparing Front Side Member For Installation

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit in front side member and secure it to the body.
  2. Drill holes for blind rivets. > Diameter 6.6 mm 
    G14274757Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Holes for blind rivets

  3. Remove front side member.
  4. Prepare front side member > Bonding area  for bonding and riveting.

    5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

    G14274758Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area

scientia non olet · About LEMON Manuals