LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (50 - Body Front 9YA) >> WM, 50795503 Replacing Front Side Member >> Preliminary Work >> Preliminary Work For Body Repairs (With Straightening System)

Preliminary Work For Body Repairs (With Straightening System)

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove accessories in the repair area.
    1. 1.1  Remove add-on parts in the repair area according to the extent of damage on the vehicle.
  2. Set up straightening bench with straightening system.
  3. Set vehicle on straightening bench.
  4. Cover the add-on parts adjacent to the repair area on the vehicle.
    1. 4.1  Cover all accessories remaining on the vehicle and adjacent areas with fire-proof protective covers.
  5. Reshape connection area of the sheetmetal parts to be replaced. See Information on aluminium repairs

    5X00IN05 INFORMATION ON ALUMINIUM REPAIRS

  6. Expose joint areas.
    1. 6.1  Remove underbody protection, paint, etc. from the joint areas of the body using a hot-air gun or rotary brush.
scientia non olet · About LEMON Manuals