Removing Front Side Member (Front Section)

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Unscrew self-tapping screws -1- .
5X00IN24 SETTING SELF-TAPPING SCREWS

Fig 1: Front Side Member Component Location (Front Section)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws
Heat bonding areas > Bonding areas using > V.A.G 1416 - hot-air blower .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Cut front side member (front section) in accordance with the new part -Dimension A- .
Distance 166 mm

Fig 2: Checking Front Side Member (Front Section) Cutting Dimension
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front side member (front section)