Removing (Inner Part Of) Longitudinal Member For Wheel Housing Upper Section

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Remove punch rivets -A- using > VAS 852 001 - dent removal unit and > VAS 6790 - compact booster .
5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

Fig 1: Longitudinal Member For Wheel Housing Upper Section Component Location (Inner Part)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Punch rivets
Heat bonding areas. > V.A.G 1416 - Hot-air blower

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Remove (inner part of) longitudinal member for wheel housing upper section.