Installing Front Wheel Housing Liner
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order to removal.
- Check that the air duct joint is fitted correctly.
Checking air duct joint
- Tighten fastening parts to the specified tightening torque.
Tighten screws securing front wheel housing liner to front end to > Tightening torque 2.0 N.m (1.5 ft.lb) .
Tighten nuts securing front wheel housing liner to front end to > Tightening torque 2.5 N.m (1.75 ft.lb) .
Tighten screws securing front wheel housing liner to underbody to > Tightening torque 3.0 N.m (2.0 ft.lb) .