Installing Front Wing
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
When installing the headlight guide -1-
, make sure that the guide pins -arrows-
are positioned perfectly.
Headlight guide
- Installation is performed in reverse order. Pay particular attention to the following:
Tighten the top fastening screw to > Tightening torque 2 N.m (1.5 ft.lb) .
Tighten fastening screws on mounting to > Tightening torque 2 N.m (1.5 ft.lb) .
Tighten fastening screws on wing to > Tightening torque 10 N.m (7.5 ft.lb) .
Tighten fastening screws on wing to > Tightening torque 10 N.m (7.5 ft.lb) .
Tighten fastening nuts on the guide to > Tightening torque 4 N.m (3 ft.lb) .
Tighten fastening screws at the headlight mounting point to > Tightening torque 6 N.m (4.5 ft.lb) .