LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (50 - Body Front 9YA) >> WM, 505319 Removing And Installing Wing Connection Panel >> Removing Front Wing Connection Panel

Removing Front Wing Connection Panel

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • Do not release and disconnect electric plug connection. 
  1. Mark installation position of the front wing connection panel.
    G14274512Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Installation position of wing connection panel

  2. Unscrew screw -1-  and move pressure sensor -2-  aside.
    G14274513Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Pressure sensor

  3. Unclip electric wire harness -1-  (-2-  ).
    G14274514Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric wire harness

  4. Unscrew and remove screws
    G14274515Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws

  5. Remove front wing connection panel -2-  .
    G14274516Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front wing connection panel

scientia non olet · About LEMON Manuals