LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (50 - Body Front 9YA) >> WM, 503955 Replacing Spring Strut Mount >> Preparing Spring Strut Mount For Installation

Preparing Spring Strut Mount For Installation

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit in spring strut mount and secure it to the body.
  2. Position support panel -1-  behind the loosened longitudinal member for wheel housing upper section (inner part) -2-  .
    G14274417Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Support panel

  3. Drill holes for blind rivets in areas -A-  .
    G14274418Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Drilling areas

  4. Drill holes for blind rivets in areas -A and B-  .
    G14274419Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Drilling areas

  5. Remove spring strut mount.
  6. Prepare spring strut mount for riveting and bonding.

    5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

    G14274420Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

    G14274421Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  7. Prepare spring strut mount in area -A-  for welding.
    G14274422Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Welding range

  8. Prepare spring strut mount in area -A-  for welding.
    G14274423Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Welding range

  9. Prepare spring strut mount in area -B-  for plug-welding.
    G14274424Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Welding range

  10. Prepare spring strut mount in area -B-  for plug-welding.
    G14274425Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Welding range

scientia non olet · About LEMON Manuals