LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (50 - Body Front 9YA) >> WM, 503955 Replacing Spring Strut Mount >> Preliminary Work For Body Repairs (With Straightening System)

Preliminary Work For Body Repairs (With Straightening System)

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove add-on parts in the repair area according to the extent of damage on the vehicle.
  2. Set up straightening bench with straightening system.
  3. Set vehicle on straightening bench.
  4. Cover all accessories remaining on the vehicle and adjacent areas with fire-proof protective covers.
  5. Reshape connection area of the sheetmetal parts to be replaced.
    NOTE: Information on aluminium repairs

    5X00IN05 INFORMATION ON ALUMINIUM REPAIRS

  6. Remove underbody protection, paint, etc. from the joint areas of the body using > V.A.G 1416 - Hot-Air Blower  or rotary brush.
scientia non olet · About LEMON Manuals