Assembling Lock Carrier: Notes

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Check rubber buffer and replace if necessary.

Assembly is performed in reverse order. Pay particular attention to the following:
For split lock carriers (off-road):

Tighten screws securing lower part of lock carrier to upper part of lock carrier to > Tightening torque 9 N.m (6.5 ft.lb) .

For all vehicles:

Tighten screws for coolant line to > Tightening torque 8 N.m (6 ft.lb) .

Tighten screw on top of radiator mounting to > Tightening torque 8 N.m (6 ft.lb) .

Tighten screws on side of radiator mounting to > Tightening torque 8 N.m (6 ft.lb) .