Installing Lock Carrier
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
Tighten fastening screws on upper lock carrier to > Tightening torque 8 N.m (6 ft.lb) .
Tighten bottom fastening screw on lower lock carrier to > Tightening torque 10 N.m (7.5 ft.lb) .
Tighten top fastening screw on lower lock carrier to > Tightening torque 25 N.m (19 ft.lb) .
Tighten fastening screw securing refrigerant lines to condenser to > Tightening torque 9 N.m (6.5 ft.lb) .