Spacer For Replacing The Vehicle Identification Number

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

THE SPACER FOR APPLYING THE VEHICLE IDENTIFICATION NUMBER IS IN THE FRONT RIGHT SEAT CROSS MEMBER. TWO SECTIONS ARE INTENDED FOR USE.

SECTION 1 -A - IS THE STANDARD SPACER.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

VEHICLE IDENTIFICATION NUMBER

SECTION 2 -B - IS THE SPARE SPACER FOR A CORRECTED VEHICLE IDENTIFICATION NUMBER.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

VEHICLE IDENTIFICATION NUMBER

IMPORTANT:

ONLY STAMP THE VEHICLE IDENTIFICATION NUMBER ON A CATHODIC DIP-COATED SHEETMETAL PART.

STAMP THE VEHICLE IDENTIFICATION NUMBER TO BE REPLACED USING > VAS 6939 - STEEL STAMPING NUMBER SET AND THE PORSCHE STAR > 9693 - HAND-HELD MARKING PUNCH IN THE SPACE PROVIDED FOR THIS PURPOSE.
MASK IMPRINTED VEHICLE IDENTIFICATION NUMBER.
PAINT USING EXTERIOR PAINT.
REMOVE THE VEHICLE IDENTIFICATION NUMBER MARK.
PAINT REPAIR AREA WITH CLEAR LACQUER.

¹⁾ CATHODIC-DIP COATING IS THE PRIMER APPLIED TO THE SHEETMETAL PARTS AT THE FACTORY