LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (5X - Body General 9YA) >> WM, 5X00IN25 Making Ground Connections >> Making Ground Connection Using A Through Bolt >> Making Ground Connection Using A Rivet Nut

Making Ground Connection Using A Rivet Nut

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drill a hole. > Diameter 4 mm 
    G14273947Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Drilling hole

  2. Remove dirt and primer using an end brush > 9399/3 - end brush  .
    G14273948Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing primer

  3. Drill out the bore. > Diameter 11 mm 
    G14273949Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Drilling out bore

  4. De-burr the bore on both sides.
  5. Fit and tighten blind rivet nut. > BLIND RIVET NUT 999.500.196.01  > V.A.G 1765C - Pop Rivet Nut Pliers 
    G14273950Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Tightening blind rivets

  6. Screw on components using a countersunk screw. > COUNTERSUNK SCREW 999.073.549.01 
  7. Tighten threaded joint to the specified torque. > Tightening torque 15 N.m (11 ft.lb) 
scientia non olet · About LEMON Manuals