Punch And Bottom Die Pairs

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Punch rivet	Pressing punch rivet joints out of two-layered panel joints with restricted access	D3 + D5
	Pressing punch rivet joints out of three-layered panel joints with restricted access	D4 + D5
	Pressing punch rivet joints out of two-layered panel joints	S4 + D5
	Pressing punch rivet joints out of three-layered panel joints	S5 + D5

The correct punch and bottom die pair for the punch rivet joint is specified in the table above.
Press out punch rivet using a hydraulic riveting tool > VAS 6790 - Compact Booster .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressing out punch rivet