Work Sample
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
A work sample must be created and checked in order to verify and provide documentary evidence of correct bonding. The result of this work sample must be documented in the bonding log. The steps for creating the work sample are described in the processing instructions for the adhesive.
IMPORTANT:
If the result of the work sample is negative (it does not harden correctly), correct bonding cannot be verified.
In this case, measures must be taken to ensure correct hardening, the bonding supervisor must be consulted and bonding may have to be repeated.
- Once the required assembly strength is reached, break the work sample -1-
and evaluate the degree of hardening of the sample -arrow-
. The adhesive must break
and must not have any fluid or soft parts.
Work sample (symbolic image)
- Document the result of the check on the work sample in the bonding log.