LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (5X - Body General 9YA) >> WM, 5X00IN Body Parts Of Various Sheet-Steel Strengths >> Welding Work

Welding Work

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • The oxyacetylene welding process must not be used for welding body parts made of high-strength, very-high-strength and ultra-high-strength steel! 
  • Carry out test-welding before starting resistance spot-welding! 

All specified steel panels can be welded using the approved resistance spot-welders.

The MIG welding process can only be used on ultra-high-strength steel in exceptional cases! Details of where this process can be used can be found in the relevant repair instructions. The MIG welding process can be used without restriction on all other specified steel panels.

scientia non olet · About LEMON Manuals