LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Complete Vehicle - General -- 9YA - Cayenne (9YA)) >> WM, 0X01IN Checking Alarm System >> Alarm System: Checking Operation Of Monitoring Devices >> Checking Alarm System

Checking Alarm System

WARNING: This page is about a different car, the 2020 Porsche Cayenne and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unlock the vehicle, read out the fault memory and erase it if necessary.
  2. Lock the vehicle with the remote control. A warning tone must not be emitted by the alarm system horn shortly after locking the vehicle (not relevant for USA).
  3. If a warning tone is emitted, open and close all doors and outer lids one after the other (not relevant for USA).
  4. As soon as the vehicle is locked, the LED in the driver's door panel must flash quickly for 2 seconds and then start to flash slowly.

    Fault indicator: 

  5. LED flashes quickly for 2 seconds, lights up for 28 seconds and then flashes slowly: Connect the System Tester and read out the fault memory.