Connectivity Function Test (Not For Vehicles With External Communication Control Unit (I-No. IV1, IV2, IV4, IV5, IV6, IV7, IV8))

WARNING: This page is about a different car, the 2020 Porsche Cayenne and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

NOTIFICATION

Voltage drop

Irreparable damage to control unit
Damage to control unit
Fault entries in the control unit
Control unit programming/coding is aborted
Malfunctions in the control unit, even during programming
1. → Switch off ignition before disconnecting the control unit.
2. → Make sure that the power supply is not interrupted during programming/coding.
3. → Connect the battery charger with at least > current 90 A to the vehicle battery.

Information

Make sure that you have sufficient mobile phone and satellite reception.

Switch on the ignition.
Place original remote control (hand-held transmitter) in emergency start tray.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Emergency start tray
Select the Set menu in the main menu on the display and operator control unit.
Select the Porsche Connect menu.
The Remote access authorization menu item must be available for selection and must not be greyed out.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Remote access authorization