Removing Rear Skirt

Information 

Carefully press reinforcement away. The upper section of the bonding area must not become detached.

Information 

• Some of the repair illustrations show only one side of the vehicle or a similar component. 
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well. 

1. Remove expansion rivet -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Expansion rivet

2. Only for vehicles with Remote parking: 

   Release and unplug electric plug connection -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Electric plug connection for ParkAssist sensor

3. Unclip line bracket -2-  and move wire harness aside.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Wire harness for ParkAssist sensor

4. Remove expansion rivet -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Expansion rivet

5. Release locking lugs -2-  and press reinforcement -1-  inwards until the locking lugs for the rear skirt underneath are accessible.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Guide at the side of rear skirt

6. Remove rear skirt -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Rear skirt

   1. 6.1  Release locking lugs -2-  ill the way around.
   2. 6.2  Remove rear skirt -1-  .