Installing Centre Retaining Strip

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

Carefully clean any dirt, grease, wax and other impurities off the fitting area of the body using isopropanol.
Always use a clean cloth.
The room and object temperature must be at least +18 °C.
Air humidity must be 40% - 60%.

Installation is performed in reverse order. Pay particular attention to the following:

Tighten nuts -2- .
> Tightening torque 4 (3 ftlb.) Nm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Centre retaining strip