LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (63 - Bumpers -- Cayenne 9YB) >> WM, 631519 Removing And Installing Front Apron >> Installing Front Apron

Installing Front Apron

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

During installation, make sure that all locking lugs are positioned correctly and have engaged fully. Use a suitable tool to help if necessary.

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten fastening screws on top of wing to > Tightening torque 2.5 (1.75 ftlb.) Nm  .

    Tighten fastening screws on lower front end to > Tightening torque 4.5 (3.25 ftlb.) Nm  .

    Tighten fastening screws on upper front end to > Tightening torque 3 (2 ftlb.) Nm  .

scientia non olet · About LEMON Manuals