LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (53 - Body Rear 9YB) >> WM, 53691903 Removing And Installing Rear Wheel Housing Liner (Lower Section) >> Installing Rear Wheel Housing Liner (Lower Section)

Installing Rear Wheel Housing Liner (Lower Section)

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screw for rear wheel cover to > Tightening torque 1.5 (1 ftlb.) Nm  .

    Tighten screw securing lower section of wheel housing liner to rear wheel cover to > Tightening torque 2 (1.5 ftlb.) Nm  .

    Tighten nut securing lower section of wheel housing liner to wheel cover to > Tightening torque 2.5 (1.75 ftlb.) Nm  .

scientia non olet · About LEMON Manuals