Installing Cross Panel (Lower Section)
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay p articular attention to the following:
Check that the seal on the cross panel (lower section) -1- is fitted securely in the supports -2- .
Seal on cross panel (lower section)
Tighten screws on cross panel (lower section) to > Tightening torque 10 (7.5 ftlb.) Nm.
Tighten screw securing refrigerant line to cable bushing to > Tightening torque 9 (6.5 ftlb.) Nm.