Removing Cross Panel (Upper Section)

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Open sealing elements on wire harness -1- completely at the retaining clips -2-

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Sealing elements
Release locking mechanism for cover on external power connection -1- and open cover on external power connection -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Power distributor, front
Unscrew nut -3- from front power distributor -4- and unclip front power distributor -4- from external power connection -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Power distributor, front
Unscrew nuts -1- and move external power connection -2- with lines connected aside.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Nuts
Unscrew speed nuts -1- and detach heat shield -2- from cross panel (upper section).

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cross panel (upper section)
Unscrew and remove screws -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws
Lift cross panel (upper section) -2- up and remove it.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cross panel (upper section)