Installing Front Wheel Housing Liner
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order to removal.
- Check that the air duct joint is fitted correctly.
Checking air duct joint
- Tighten fastening parts to the spec ified tightening torque.
Tighten screws securing front wheel housing liner to front end to > Tightening torque 2.0 (1.5 ftlb.) Nm.
Tighten nuts securing front wheel housing liner to front end to > Tightening torque 2.5 (1.75 ftlb.) Nm.
Tighten screws securing front wheel housing liner to underbody to > Tightening torque 3.0 (2.0 ftlb.) Nm.