Installing Front Wing
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
When installing the headlight guide -1- , make sure that the guide pins -Arrows- are positioned perfectly.
Headlight guide
- Installation is performed in reverse order. Pay particular attention to the following:
Tighten the top fastening screw to > Tightening torque 2 (1.5 ftlb.) Nm .
Tighten fastening screws on mounting to > Tightening torque 2 (1.5 ftlb.) Nm.
Tighten fastening screws on wing to > Tightening torque 10 (7.5 ftlb.) Nm.
Tighten fastening screws on wing to > Tightening torque 10 (7.5 ftlb.) Nm.
Tighten fastening nuts on the guide to > Tightening torque 4 (3 ftlb.) Nm.
Tighten fastening screws at the headlight mounting point to > Tightening torque 6 (4.5 ftlb.) Nm.