Removing Front Wing Connection Panel

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

Do not release and disconnect electric plug connection.

Mark installation position of the front wing connection panel.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of wing connection panel
Unscrew screw -1- and move pressure sensor -2- aside.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressure sensor
Unclip electric wire harness -1- (-2- ).

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric wire harness
Unscrew and remove screws -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws
Remove front wing connection panel -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front wing connection panel