Installing Cover For Front Underbody
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Micro-self-locking screws
Fit new screws following removal.
Fit new screws following removal.
- Installation is performed in reverse order. Pay particular attention to the following:
Screw in fastening screws and tighten to > Tightening torque 3 N.m (2 ft.lb) .
Screw in new fastening screws and tighten to > Tightening torque 6 N.m (4.5 ft.lb) .
Screw in fastening screws and tighten to > Tightening torque 3 N.m (2 ft.lb) .
Screw in fastening screws and tighten to > Tightening torque 3 N.m (2 ft.lb) .