Removing Inner Reinforcement
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Only make cuts in the top plate. Make sure not to damage the plate underneath when doing this.
- Separate welded seams on inner reinforcement.
- 1.1 Separate welded seams -A-
in the front area.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Welded seams on front inner reinforcement
- 1.2
Separate welded seams -A-
in the rear area.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Welded seams on rear inner reinforcement
- Drill out spotwelds on inner reinforcement.
- 2.1
Separate spotwelds in the front area.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Spotwelds on front inner reinforcement
- 2.2
Separate spotwelds in the rear area.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Spotwelds on rear inner reinforcement
- Remove inner reinforcement.