LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (51 - Body Center, Roof, Frame 9YA) >> WM, 517355 Replacing (Front) FLOORPAN >> Removing Inner Longitudinal Member Reinforcement On FLOORPAN

Removing Inner Longitudinal Member Reinforcement On FLOORPAN

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Separate welded seams -A-  on inner longitudinal member reinforcement.
    G14275870Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Welded seams on inner longitudinal member reinforcement

  2. Drill out spotwelds on inner longitudinal member reinforcement.
    G14275871Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Spotwelds on inner longitudinal member reinforcement

  3. Remove inner longitudinal member reinforcement on floorpan.
scientia non olet · About LEMON Manuals