Preparing Inner Reinforcement For Installation
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Drill holes > Holes on inner reinforcement
for plug-welding.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Holes on inner reinforcement
- Prepare marked areas -A and B-
for joining.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Inner reinforcement
- 2.1 -A-:
Prepare the marked area for applying a full weld using inert gas.
- 2.2 -B-:
Prepare the marked area for plug-welding.