Installing Dashboard Bracket
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
Tighten screws on pillars to > Tightening torque 20 N.m (15 ft.lb) .
Tighten nuts on pillars to > Tightening torque 20 N.m (15 ft.lb) .
Tighten screws on windscreen to > Tightening torque 20 N.m (15 ft.lb) .
Tighten screws under carpet to > Tightening torque 20 N.m (15 ft.lb) .
Tighten screw securing mounting saddle to retaining frame to > Tightening torque 20 N.m (15 ft.lb) .
Tighten screws securing heating/fresh-air unit to dashboard bracket to > Tightening torque 3.6 N.m (2.6 ft.lb) .
Tighten screws to > Tightening torque 20 N.m (15 ft.lb) .