Preparing Connection Areas Of Body For Installing Outer Side Member (Rear Section)

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Align the sealing surfaces and connections of the body.
De-burr connection points and prepare them for joining.

Prepare connection areas > Connection areas for joining.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection areas


Yellow	Bonding and resistance spot-welding > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE
Orange	Bonding and riveting > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

Prepare connection areas > Connection areas for applying a full aluminum weld using inert gas.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection areas


Yellow	Applying full weld using inert gas (steel)
Magenta	Applying full aluminum weld using inert gas > 5X00IN10 WELDING ALUMINIUM